Nov. 20, 2026

Video page →

Strobe Disc: is your turntable at the right speed?

Our free strobe disc checks your turntable's speed, and an everyday LED lamp is all the light it needs

You don't need a special strobe lamp to check your turntable's speed. Many everyday mains LED bulbs flicker 100 times a second (120 on 60 Hz mains), far too fast to see, but fast enough to freeze the bars of a strobe disc.

Print the Strobe Disc, cut it out and put it on the platter under an LED lamp. When the speed is right, the ring for your speed and mains frequency stands still. If the bars drift clockwise, the platter is running fast; anticlockwise, slow.

If no ring settles, try another lamp: "flicker-free" LEDs and incandescent bulbs give a steady light. The disc has rings for 33 1/3, 45 and 78 at 50 or 60 Hz.

In the clip: the disc at 33 1/3 under an LED lamp, the 50 Hz ring standing still; then at 34 rpm, drifting clockwise, and at 32.7 rpm, anticlockwise.

Sound: the surface of a record, from our own turntable.

#turntablesetup #strobedisc #turntable #vinyl #vinylrecords #vinylcommunity #recordplayer #hifi #audiophile #passolio

← News