How to use: Open this page on your phone. Take the record off, lay the phone flat on the mat beside the spindle and follow the three steps. Then adjust the turntable's feet until the bubble sits in the centre.

Follow Passolio for the next tool: Instagram · Facebook · YouTube

Know someone who'd find it useful? Share this tool

Why the platter should be level

A tilted platter pulls the tonearm towards the low side. That acts like too much or too little anti-skate: the stylus presses harder on one groove wall, wears unevenly and can mistrack, and the platter bearing carries the load on one side. Within about 0.5° is a sensible target, and with adjustable feet it's easy to do better.

Why two readings

No phone's sensor is mounted perfectly flat, and a camera bump or a case tilts the phone as well, so on its own a phone can read up to a degree off. Turning it round on the same spot reverses the platter's tilt but not the phone's own error: the average of the two readings is the phone's error, and half their difference is the platter's true tilt. After the check, the readings have the phone's error taken off.

Tips